BudBox Pro GT1 – 1.8m x 1.1m x 2.4m – Grow Tent

BudBox Pro GT1 – Perfectly Matched for a Gavita 1000W Fixture!

The BudBox GT1 grow tent is specifically designed to get the very best out of your 1000W Gavita fixture, known throughout the industry as one of the biggest yielding lighting fixtures out there – the go-to choice for commerical growers operating on a mass scale. Use the two combined, and you’ll be looking at pulling in massive harvests in no time at all.

Contains:
1 x Carry bag
1 x White or silver lined fabric tent
8 x Upright poles
8 x Horizontal bars
8 x Corner pieces
4 x Hanging rails
6 x Plastic hanging rail covers
4 x Hanging straps
1 x Waterproof spill-tray

Dimensions:
180cm x 110cm x 240cm

Specs:
Pole thickness: 25mm rolled steel
Connector pieces: Rolled steel
Ventilation panels: 2 (64cm x 25cm)
Viewing window: Yes
Irrigation bar and port: Yes
Intake ports: 2 (23cm diameter)
Extraction ports: 2 (23cm diameter)
Cable ports: 4 (8cm diameter)
Cooltube ports: 4 (8cm diameter)
Doors:1 (front doors that zip all the way around to the sides), 1 x side access door

How the BudBox Pro Works:
BudBox tents are widely regarded as the best in the industry, but that hasn’t stopped their development team from making improvements. The new Pro range features design tweaks and improvements that will make your growing experience that bit richer!

A Stronger Framework
Metal Corners and click-lock poles for a framework that’s as strong as anything else on the market – easily capable of supporting your growroom equipment (and then some!). All poles and bars are powder-coated, drastically reducing the chances of corrosion.

Check your plants Safely
This tent has its own 11.5″ x 8″ viewing window. This allows you to check on your plants without opening the door and disturbing their environment. The window even has a transparent green filter on it – this is because light in the green area of the spectrum has no effect on plants’ light cycles. This means that you can look through the window and check on your plants at any time of day without negatively them.

Improved Fabric Outer
One of the things that made the original Budbox range such a hit was the quality of the fabric outer. The new outer, however, is even tougher and more durable than the original! It’s also a hell of a lot lighter, making the tent quicker and easier to erect and dismantle than the original range, while sacrificing none of its robustness.

Which size fan and filter do I need for my Grow Tent?
There exists a (relatively) easy formula to work out which size extraction you need for your space. Find out the volume in m3 (metres cubed) of your grow space with Width x Length x Height = Volume. Then, using that figure do, Volume x 60 = Air Movement Per Hour (this will refresh the air in your grow room every minute).

If you are using a filter (which you are), then Air Movement Per Hour x 1.2 = the amount of air your fan will need to move. Use the figures below to match up your space to your preferred fan and filter combo!

Bear in mind it’s always better to over spec your fan and reduce its output with a controller, this gives you the flexibility to increase its output to maintain optimum conditions for your plants, for example in the middle of summer.

KEY FEATURES

• Specifically designed to support Gavita’s powerful 1000W lights and reflectors
• Designed for better light penetration than a regular sized grow tent
• More headroom – better for hanging vertically mounted ballasts
• Fewer issues with temperatures thanks to the increased height
• Metal, click-lock corner segments for an enhanced structure
• Tough & durable, yet lightweight, outer shell that’s easy to fit
• Viewing window with green filter panel
• Twenty percent larger ventilation panels for enhanced air flow
• Powder-coated tempered & rolled steel framework
• Military-grade zips